The piping solution provider: www.pdxsteel.com

Reducing Tee

Size: 1/2"-48"
Wall thickness: SCH5S-SCHXXS
Material: Special Alloy, Super Duplex Stainless Steel, Stainless Steel, Carbon Steel, Titanium
Standards: ASME B16.9, ASME B16.28, MSS SP43, MSS SP75

  • PRODUCT DETAIL
  • Material

Size: 1/2″-48″
Wall thickness: SCH5S-SCHXXS
Material: Special Alloy, Super Duplex Stainless Steel, Stainless Steel, Carbon Steel, Titanium
Standards: ASME B16.9, ASME B16.28, MSS SP43, MSS SP75

Reducing Tee

A reducing tee features a smaller bore size at the branched pipe side (generally 2/3 sizes smaller).
In case a larger bore size reduction is necessary, then a reinforced branch connection (such as a Weldolet) shall be preferred to prevent turbulence and have a smoother flow reduction.
Reducing Tee are accessible in female string attachments, solvent weld attachments, side outlets and contradicted dissolvable weld attachments. These sorts of pipe fittings are vital as they fill two needs, i.e., they are utilised to join or split a liquid stream. These are broadly utilised for positive and vacuum applications. Besides, reducing tees can likewise be utilised to minimise conveyance lines to encourage ice creators. Because of their smooth stream ways, there is no turbulence in this way they can be utilised for water and waste supply. They are for the most part utilised as a part of the fields of semiconductor, and concoction handling.
The standard dimensions and tolerances of equal and reducing pipe tees are covered by the ASME B16.19 specification (carbon and alloy steel) and by the MSS SP 43 spec (for stainless steel and nickel alloys tees).

A reducing tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run. Before buying a reducing tee, there is a list of features and specifications one must look into to get the appropriate product. For instance,

  • It should be made under strict security standards
  • It should provide good impact strength
  • It should be easy to install
  • It should be light in weight

Features Of Reducing Tee

  • There are straight pipe tees which have the same size openings.
  • Reducing tee make them open of various size and two openings of the same size.
  • There are sterile reducing tees which are utilised as a part of waste lines.
  • These sort of reducing tees have a bent branch which is intended for a wipe outfitting. They are utilised to avoid hindrance of waste.
  • A reducing tee has dragged to attach the fitting to a divider or stud.
  • A reducing tee utilises pressure fittings on two or more finishes.
  • A reducing tee has a strong opening. This opening is utilised as a part of conjunction with a strong fitting for a get out an opening on a drain pipe.

Pipe Tee Manufacturing Process

Cold forming is the most used manufacturing process for seamless buttweld tees, as illustrated below. Other methods are the single, Hot Forming or double seam welding process.

Cold Forming

Buttweld tee manufacturing process cold forming

Hot Forming

Hot Forming

One Seam Elliptical Method

One Seam Elliptical Method

Two Seam Welding Method

Two Seam Welding Method

Quality Control
We have our own Physical & Chemical Testing Center Lab to guarantee our product quality. Our test items & instrument fully meet international standards.

Charpy impact test
Charpy impact test
Corrosion test
Corrosion test
PT penetration inspection
PT penetration inspection
Tensile test
Tensile test
Ultrasonic wt testing
Ultrasonic wt testing
Hardness test
Hardness test
Dimension test
Dimension test
High test
High test
Thickness test
Thickness test
PMI portable spectrometer
Alloy Analyzer (PMI)


Application of Equal Tee

  1. Pipe and Tubes for petrochemical industry
  2. Pharmaceutical industry 
  3. Food industry
  4. Aviation and aerospace industry
  5. Architectural decoration industry
  6. Oil and Gas Pipeline industry

Dimensions Butt Welded Reducing Tees ASME B16.9NPS 1/2 to 48

Diameters:

1/2 – 4 5 – 16 18 – 26 28 – 32 34 – 38 40 – 42 44 – 48

Reducing Tee ASME b16.9

Diameters 1/2 – 4

NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
3/4 – 1/2 26.7 21.3 29 29
1 – 1/2 33.4 21.3 38 38
1 – 3/4 33.4 26.7 38 38
1.1/4 – 1/2 42.2 21.3 48 48
1.1/4 – 3/4 42.2 26.7 48 48
1.1/4 – 1 42.2 33.4 48 48
1.1/2 – 1/2 48.3 21.3 57 57
1.1/2 – 3/4 48.3 26.7 57 57
1.1/2 – 1 48.3 33.4 57 57
1.1/2 – 1.1/4 48.3 42.2 57 57
2 – 3/4 60.3 26.7 64 44
2 – 1 60.3 33.4 64 51
2 – 1.1/4 60.3 42.2 64 57
2 – 1.1/2 60.3 48.3 64 60
2.1/2 – 1 73 33.4 76 57
2.1/2 – 1.1/4 73 42.2 76 64
2.1/2 – 1.1/2 73 48.3 76 67
2.1/2 – 2 73 60.3 76 70
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
3 – 1.1/4 88.9 42.2 86 70
3 – 1.1/2 88.9 48.3 86 73
3 – 2 88.9 60.3 86 76
3 – 2.1/2 88.9 73 86 83
3.1/2 – 1.1/2 101.6 48.3 95 79
3.1/2 – 2 101.6 60.3 95 83
3.1/2 – 2.1/2 101.6 73 95 89
3.1/2 – 3 101.6 88.9 95 92
4 – 1.1/2 114.3 48.3 105 86
4 – 2 114.3 60.3 105 89
4 – 2.1/2 114.3 73 105 95
4 – 3 114.3 88.9 105 98
4 – 3.1/2 114.3 101.6 105 102
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M

Dimensions Butt Welded Reducing Tees ASME B16.9NPS 1/2 to 48

Reducing Tee ASME b16.9

Diameters 5 – 16

NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
5 – 2 141.3 60.3 124 105
5 – 2.1/2 141.3 73 124 108
5 – 3 141.3 88.9 124 111
5 – 3.1/2 141.3 101.6 124 114
5 – 4 141.3 114.3 124 117
6 – 2.1/2 168.3 73 143 121
6 – 3 168.3 88.9 143 124
6 – 3.1/2 168.3 101.6 143 127
6 – 4 168.3 114.3 143 130
6 – 5 168.3 141.3 143 137
8 – 3.1/2 219.1 101.6 178 152
8 – 4 219.1 114.3 178 156
8 – 5 219.1 141.3 178 162
8 – 6 219.1 168.3 178 168
10 – 4 273 114.3 216 184
10 – 5 273 141.3 216 191
10 – 6 273 168.3 216 194
10 – 8 273 219.1 216 203
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
12 – 5 323.8 141.3 254 216
12 – 6 323.8 168.3 254 219
12 – 8 323.8 219.1 254 229
12 – 10 323.8 273 254 241
14 – 6 355.6 168.3 279 238
14 – 8 355.6 219.1 279 248
14 – 10 355.6 273 279 257
14 – 12 355.6 323.8 279 270
16 – 6 406.4 168.3 305 264
16 – 8 406.4 219.1 305 273
16 – 10 406.4 273 305 283
16 – 12 406.4 323.8 305 295
16 – 14 406.4 355.6 305 305
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M

Dimensions Butt Welded Reducing Tees ASME B16.9NPS 1/2 to 48

Reducing Tee ASME b16.9

Diameters 18 – 26

NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
18 – 8 457 219.1 343 298
18 – 10 457 273 343 308
18 – 12 457 323.8 343 321
18 – 14 457 355.6 343 330
18 – 16 457 406.4 343 330
20 – 8 508 219.1 381 324
20 – 10 508 273 381 333
20 – 12 508 323.8 381 346
20 – 14 508 355.6 381 356
20 – 16 508 406.4 381 356
20 – 18 508 457 381 368
22 – 10 559 273 419 359
22 – 12 559 323.8 419 371
22 – 14 559 355.6 419 381
22 – 16 559 406.4 419 381
22 – 18 559 457 419 394
22 – 20 559 508 419 406
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
24 – 10 610 273 432 384
24 – 12 610 323.8 432 397
24 – 14 610 355.6 432 406
24 – 16 610 406.4 432 406
24 – 18 610 457 432 419
24 – 20 610 508 432 432
24 – 22 610 559 432 432
26 – 12 660 323.8 495 422
26 – 14 660 355.6 495 432
26 – 16 660 406.4 495 432
26 – 18 660 457 495 444
26 – 20 660 508 495 457
26 – 22 660 559 495 470
26 – 24 660 610 495 483
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M

Dimensions Butt Welded Reducing Tees ASME B16.9NPS 1/2 to 48

Reducing Tee ASME b16.9

Diameters 28 – 32

NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
28 – 12 711 323.8 521 448
28 – 14 711 355.6 521 457
28 – 16 711 406.4 521 457
28 – 18 711 457 521 470
28 – 20 711 508 521 483
28 – 22 711 559 521 495
28 – 24 711 610 521 508
28 – 26 711 660 521 521
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
30 – 10 762 273 559 460
30 – 12 762 323.8 559 473
30 – 14 762 355.6 559 483
30 – 16 762 406.4 559 483
30 – 18 762 457 559 495
30 – 20 762 508 559 508
30 – 22 762 559 559 521
30 – 24 762 610 559 533
30 – 26 762 660 559 546
30 – 28 762 711 559 546
32 – 14 813 355.6 597 508
32 – 16 813 406.4 597 508
32 – 18 813 457 597 521
32 – 20 813 508 597 533
32 – 22 813 559 597 546
32 – 24 813 610 597 559
32 – 26 813 660 597 572
32 – 28 813 711 597 572
32 – 30 813 762 597 584
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M

Dimensions Butt Welded Reducing Tees ASME B16.9NPS 1/2 to 48

Reducing Tee ASME b16.9

Diameters 34 – 38

NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
34 – 16 864 406.4 635 533
34 – 18 864 457 635 546
34 – 20 864 508 635 559
34 – 22 864 559 635 572
34 – 24 864 610 635 584
34 – 26 864 660 635 597
34 – 28 864 711 635 597
34 – 30 864 762 635 610
34 – 32 864 813 635 622
36 – 16 914 406.4 673 559
36 – 18 914 457 673 572
36 – 20 914 508 673 584
36 – 22 914 559 673 597
36 – 24 914 610 673 610
36 – 26 914 660 673 622
36 – 28 914 711 673 622
36 – 30 914 762 673 635
36 – 32 914 813 673 648
36 – 34 914 864 673 660
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
38 – 18 965 457 711 597
38 – 20 965 508 711 610
38 – 22 965 559 711 622
38 – 24 965 610 711 635
38 – 26 965 660 711 648
38 – 28 965 711 711 648
38 – 30 965 762 711 673
38 – 32 965 813 711 686
38 – 34 965 864 711 698
38 – 36 965 914 711 711
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M

Dimensions Butt Welded Reducing Tees ASME B16.9NPS 1/2 to 48

Reducing Tee ASME b16.9

Diameters 40 – 42

NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
40 – 18 1016 457 749 622
40 – 20 1016 508 749 635
40 – 22 1016 559 749 648
40 – 24 1016 610 749 660
40 – 26 1016 660 749 673
40 – 28 1016 711 749 673
40 – 30 1016 762 749 698
40 – 32 1016 813 749 711
40 – 34 1016 864 749 724
40 – 36 1016 914 749 737
40 – 38 1016 965 749 749
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
42 – 26 1067 660 762 698
42 – 28 1067 711 762 698
42 – 30 1067 762 762 711
42 – 32 1067 813 762 711
42 – 34 1067 864 762 711
42 – 36 1067 914 762 711
42 – 38 1067 968 762 711
42 – 40 1067 1016 762 711
42 – 16 1067 406.4 762 635
42 – 18 1067 457 762 648
42 – 20 1067 508 762 660
42 – 22 1067 559 762 660
42 – 24 1067 610 762 660
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M

Dimensions Butt Welded Reducing Tees ASME B16.9NPS 1/2 to 48

Reducing Tee ASME b16.9

Diameters 44 – 48

NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
44 – 20 1118 508 813 686
44 – 22 1118 559 813 686
44 – 24 1118 610 813 698
44 – 26 1118 660 813 698
44 – 28 1118 711 813 698
44 – 30 1118 762 813 711
44 – 32 1118 813 813 711
44 – 34 1118 864 813 724
44 – 36 1118 914 813 724
44 – 38 1118 965 813 737
44 – 40 1118 1016 813 749
44 – 42 1118 1067 813 762
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M
46 – 22 1168 559 851 724
46 – 24 1168 610 851 724
46 – 26 1168 660 851 737
46 – 28 1168 711 851 737
46 – 30 1168 762 851 737
46 – 32 1168 813 851 749
46 – 34 1168 864 851 749
46 – 36 1168 914 851 762
46 – 38 1168 965 851 762
46 – 40 1168 1016 851 775
46 – 42 1168 1067 851 787
46 – 44 1168 1118 851 800
48 – 22 1219 559 889 737
48 – 24 1219 610 889 737
48 – 26 1219 660 889 762
48 – 28 1219 711 889 762
48 – 30 1219 762 889 762
48 – 32 1219 813 889 787
48 – 34 1219 864 889 787
48 – 36 1219 914 889 787
48 – 38 1219 965 889 813
48 – 40 1219 1016 889 813
48 – 42 1219 1067 889 813
48 – 44 1219 1118 889 838
48 – 46 1219 1168 889 838
NPS O.D.
D
O.D.
D1
Center to End
C
Center to End
M

Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) must be specified by customer.

Reducing Tee ASME b16.9

DIMENSIONAL TOLERANCES REDUCING TEES ASME B16.9

Nominal Pipe Size

1/2 to 2.1/2

3 to 3.1/2

4

5 to 8

10 to 18

20 to 24

26 to 30

32 to 48

Outside Dia
at Bevel (D)

+1.6
-0.8

1.6

1.6

+2.4
-1.6

+4
-3.2

+6.4
-4.8

+6.4
-4.8

+6.4
-4.8

Inside Dia at End

0.8

1.6

1.6

1.6

3.2

4.8

+6.4
-4.8

+6.4
-4.8

Center to End (C / M)

2

2

2

2

2

2

3

5

Wall Thk (t)

Not less than 87.5% of Nominal Wall Thickness

Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.

Note:

MSS SP-43 only covers stainless steel buttweld fittings made for use with Schedule 5S and 10S pipe and Stub Ends suitable for use with Schedule 40S pipe, as defined in ASME B36.19. The dimensions and dimensional tolerances defined in MSS SP-43 are substantially the same as those in ASME B16.9 specifications from NPS 1/2 – NPS 24. Except with regard to the outside diameter at the bevel.

Source: Werner Sölken

Summary
product image
Aggregate Rating
5 based on 1 votes
Brand Name
Acero
Product Name
Reducing Tee
Price
USD 1-10000
Product Availability
Pre-Order Only

Material

Special Alloys

  • HASTELLOY® X
  • MONEL® R-405
  • MONEL® K-500
  • HASTELLOY® C-276
  • HASTELLOY® C-22
  • HASTELLOY® B-2
  • INCOLOY® 825
  • INCOLOY® 800H / 800HT®
  • INCONEL® 718
  • INCONEL® ALLOY 625
  • INCONEL® ALLOY 601
  • INCONEL® ALLOY 600
  • MONEL® ALLOY 400

ALLOY 20

  • NICKEL 200/201
  • MONEL® R-405
  • MONEL® K-500
  • MONEL® ALLOY 400
  • INCONEL® 718
  • INCONEL® ALLOY 625
  • INCONEL® ALLOY 601
  • INCONEL® ALLOY 600
  • INCOLOY® 825
  • HASTELLOY® X
  • HASTELLOY® C-276
  • HASTELLOY® C-22
  • HASTELLOY® B-2
  • INCOLOY® 800H / 800HT®
  • HASTELLOY® B-3

Duplex Stainless Steel

  • ZERON® 100, SUPER DUPLEX STAINLESS STEEL
  • Super Duplex S32760
  • LDX 2101®, DUPLEX STEEL
  • Duplex S31803
  • SUPER DUPLEX 2507
  • DUPLEX 2205

Stainless Steel

  • STAINLESS STEEL NITRONIC 50HS
  • STAINLESS STEEL NITRONIC 60
  • STAINLESS STEEL NITRONIC 50
  • STAINLESS STEEL 13-8PH
  • STAINLESS STEEL 15-5PH
  • STAINLESS STEEL PRODEC 303
  • STAINLESS STEEL 303
  • STAINLESS STEEL 446
  • STAINLESS STEEL 410S
  • STAINLESS STEEL 410
  • STAINLESS STEEL 304-304H
  • STAINLESS STEEL 17-4
  • STAINLESS STEEL 347
  • STAINLESS STEEL 440C
  • STAINLESS STEEL 309
  • STAINLESS STEEL 316-316l
  • STAINLESS STEEL AL-6XN®
  • STAINLESS STEEL 330
  • STAINLESS STEEL 321
  • 317L STAINLESS STEEL
  • STAINLESS STEEL 310/310S
  • Stainless Steel 304L
  • Stainless Steel 304
  • STAINLESS STEEL 253 MA

Carbon Steel

  • CARBON STEEL PRODUCTS

Titanium

  • 10V-2Fe-3Al
  • 6Al-4V
  • 6Al-4V STA
  • 6Al-4V ELI
  • 6Al-2Sn-4Zr-2Mo

PREV
NEXT
Inquery now

SUBSCRIBE TO OUR NEWSLETTER

FOLLOW US

YouTube
العربية简体中文繁體中文NederlandsEnglishFrançaisDeutschItaliano日本語한국어LatinPortuguêsРусскийEspañolTürkçe

QQ
Email me
Mail to us